Nano P1 Series Sterile Air Membrane Filters

flow capacity: 40 - 702 scfm

The nano P1 range of sterile membrane process filters are fabricated from polished 304 or 316 stainless steel for critical compressed air and gas applications in the pharmaceutical, high tech manufacturing, food processing and beverage industries. This range encompasses ten models with connections from ¼" to 3" and rated flows from 40 to 702 scfm. Specifically designed for absolute particulate and bacteria retention in sterile environments, these filters are ideally suited for pharmaceutical protocols where documentation and integrity are critical. The PTFE membrane filtration media is housed in a polypropylene element which incorporates a positive double o-ring click-lock seal and is 100% integrity tested for reliable performance.

Call us TODAY at 727-835-0678 or
Toll Free at 800-761-4298


Model(s): PF 0050 SM-N, PF 0065 SM-N, PF 0085 SM-N, PF 0120 SM-N, PF 0170 SM-N, PF 0295 SM-N, PF 0460 SM-N, PF 0680 SM-N, PF 0850 SM-N, PF 1150 SM-N

*Scroll to the right on mobile to see entire chart
   Model
304 SS
filter
316 SS
filter
316 SS
tri-clamp
replacement
element
inlet & outlet
NPT(F)
rated flow1
scfm
Nm3/h
PF 0050 SM-N
E 102 SM
¼"
40
68
PF 0065 SM-N
  
E 102 SM
"
50
85
PF 0085 SM-N
E 102 SM
½"
55
93
PF 0120 SM-N
  
E 102 SM
¾"
60
102
PF 0170 SM-N
E 105 SM
1"
102
173
PF 0295 SM-N
  
E 105 SM
1½"
118
201
PF 0460 SM-N
E 110 SM
2"
235
399
PF 0680 SM-N
  
E 120 SM
2"
435
739
PF 0850 SM-N
E 120 SM
2½"
468
795
PF 1150 SM-N
E 130 SM
3"
702
1193
(1) at 100 psig. For all other pressures, refer to the pressure correction factor table

➤Click Here for Correction Factors

*Scroll to the right on mobile to see entire chart
   Specifications
standard
optional
design operating pressure range
0 to 232 psig
-
inlet & outlet connections
NPT(F)
tri-clamp sanitary
drain & vent connections
¼" BSPP
-
filter housing material
1.4301 quality
304 stainless steel
1.4404 quality
316L stainless steel
filter housing polishing
passivated & polished to
grade Ra <1.6um
-
filter housing seals
aseptic EPDM
consult mdi
Element Performance
SM
particle removal (at 100% PTFE membrane)
0.01 micron
continuous operating temperature range
35 to 120°F
maximum sterilizing temperature 3
257°F
media material
polypropylene 4
media support & endcap material
polypropylene
element to housing connection
positive click lock with dual silicone o-rings
(3) at 30 psia for 20 minutes. Applies to element only
(4) validation documentation available on request

No Options Available at This Time.




Nano p1 sterile depth Series Dimensions
*Scroll to the right on mobile to see entire chart
Model
A (in)
B2 (in)
C (in)
D (in)
Weight (lbs)
PF 0050 SM-N
9.45
4.14
2.76
2.24
4.2
PF 0065 SM-N
9.45
4.14
2.76
2.24
4.4
PF 0085 SM-N
9.45
4.25
2.76
2.24
4.6
PF 0120 SM-N
9.45
4.92
2.76
2.24
5.1
PF 0170 SM-N
11.40
4.92
3.35
2.78
7.3
PF 0295 SM-N
12.70
5.51
3.35
3.49
11.4
PF 0460 SM-N
19.02
6.70
4.10
3.64
12.1
PF 0680 SM-N
29.37
6.70
4.10
3.64
15.0
PF 0850 SM-N
29.53
7.17
4.10
3.80
15.2
PF 1150 SM-N
40.04
7.17
4.10
3.96
19.4




Email this Page 

mdi
   
AirDryerTech.com is owned and operated by mdi, Manufacturers Distributor, Inc. mdi is an Authorized Pneumatech and Nano Distributor.
Click Here to view the mdi Line Sheet.