Nano p1 ss Series Click for Larger View

Call us TODAY at 727-835-0678 or
Toll Free at 800-761-4298

Request A Quote!

Nano P1 Series Stainless Steel Industrial Filters

flow capacity: 8 - 1500 scfm

The nano P1 range of industrial stainless steel filters are fabricated from polished 304 or 316 stainless steel for critical compressed air and gas applications in the high tech manufacturing, food processing and beverage industries.
The nano range of industrial stainless steel filters encompasses ten models with connections from 1/4” to 3” and rated flows from 50 to 1150 scfm.
Specifically designed to provide efficient and effective contaminant removal in sterile or caustic environments, these filters are ideally suited for process applications such as food and beverage facilities with washdown requirements.
The unique interchangeable borosilicate microfiber filter elements incorporate stainless steel support media and a positive double o-ring click-lock seal to ensure optimal filtration integrity.

• install with air flow from inside to outside for coalescing & from outside to inside for dry dust filtration.

Activated Carbon filters must always be installed immediately downstream of a M01 coalescing filter. They will not remove carbon monoxide (CO) or carbon dioxide (CO2) and are not suitable for breathing air applications. The life of the element decreases as the inlet temperature increases. They are not recommended for temperatures above 77°F. As a maximum, activated carbon elements should be replaced every 1000 hours or 6 months, whichever is shorter.
Model(s): PF 0050 M1-N, PF 0050 M01-N, PF 0050 AC-N, PF 0065 M1-N, PF 0065 M01-N, PF 0065 AC-N, PF 0085 M1-N, PF 0085 M01-N, PF 0085 AC-N, PF 0120 M1-N, PF 0120 M01-N, PF 0120 AC-N, PF 0170 M1-N, PF 0170 M01-N, PF 0170 AC-N, PF 0295 M1-N, PF 0295 M01-N, PF 0295 M01-N, PF 0295 AC-N, PF 0460 M1-N, PF 0460 M01-N, PF 0460 AC-N, PF 0680 M1-N, PF 0680 M01-N, PF 0680 AC-N, PF 0850 M1-N, PF 0850 M01-N, PF 0850 AC-N, PF 1150 M1-N, PF 1150 M01-N, PF 1150 AC-N

*Scroll to the right on mobile to see entire chart
   Model
304 SS
filter
316 SS
filter
316 SS
tri-clamp
replacement
element
inlet & outlet
NPT(F)
rated flow1
scfm
Nm3/h
PF 0050 (grade)-N
E 102 (grade)
¼"
50
85
PF 0065 (grade)-N
  
E 102 (grade)
⅜"
65
110
PF 0085 (grade)-N
E 102 (grade)
½"
85
144
PF 0120 (grade)-N
  
E 102 (grade)
¾"
120
204
PF 0170 (grade)-N
E 105 (grade)
1"
170
289
PF 0295 (grade)-N
  
E 105 (grade)
1½"
295
501
PF 0460 (grade)-N
E 110 (grade)
2"
460
782
PF 0680 (grade)-N
  
E 120 (grade)
2"
680
1156
PF 0850 (grade)-N
E 120 (grade)
2½"
850
1444
PF 1150 (grade)-N
E 130 (grade)
3"
1150
1954
(1) at 100 psig. For all other pressures, refer to the pressure correction factor table
(2) +/- 0.118"

➤Click Here for Correction Factors

*Scroll to the right on mobile to see entire chart
   Specifications
standard
optional
design operating pressure range
0 to 232 psig
-
inlet & outlet connections
NPT(F)
tri-clamp sanitary
drain & vent connections
¼" BSPP
-
differential pressure indicator / gauge
-
on request
filter housing material
304 stainless steel
316 stainless steel
Element Performance
M1
M01
AC
maximum particle size (ISO Class)3
2
1
-
maximum oil content (ISO Class)3
2
1
1
particle removal (microns)
1
0.01
-
max oil carry over at 68°F (ppm or mg/m3)
0.1
0.01
0.003
oil removal efficiency at 68°F
>99.99%
>99.999%
-
recommended operating temp range (°F)
35 to 212
35 to 212
35 to 77
design operating temperature range (°F)
35 to 248
35 to 248
35 to 122
pressure drop - clean
1.0 psid
1.5 psid
1.85 psid
maximum element life
12 months or 8000 hours
6 months or 1000 hrs
(3) per ISO 8573-1:2010


No Options Available at This Time.




Nano p1 SS Series Dimensions
*Scroll to the right on mobile to see entire chart
Model
A (in)
B2 (in)
C (in)
D (in)
Weight (lbs)
PF 0050 (grade) -N
9.44
4.13
2.76
2.24
4.2
PF 0065 (grade) -N
9.44
4.13
2.76
2.24
4.4
PF 0085 (grade) -N
9.44
4.25
2.76
2.24
4.6
PF 0120 (grade) -N
9.44
4.92
2.76
2.24
5.1
PF 0170 (grade) -N
11.40
4.92
3.35
2.77
7.3
PF 0295 (grade) -N
12.70
5.51
3.35
3.48
11.4
PF 0460 (grade) -N
19.02
6.69
4.09
3.64
12.1
PF 0680 (grade) -N
29.37
6.69
4.09
3.64
15.0
PF 0850 (grade) -N
29.53
7.17
4.09
3.80
15.2
PF 1150 (grade) -N
40.04
7.17
4.09
3.96
19.4
(2) +/- 0.118”




Email this Page 

mdi
   
 AirDryerTech.com is owned and operated by mdi, Manufacturers Distributor, Inc. mdi is an Authorized Pneumatech and Nano Distributor.
Click Here to view the mdi Line Sheet.